Bio Spec Industries

Go to content

info@biospec.com
800.617.3363 or 918.336.3363

Vials and Microplates

50 ml Tube Holder, Solid Aluminum

50 ml Tube Holder, Solid Aluminum

This tube holder is machined out of a 1.5 lb aluminum block and has the dimensions of a standard 2ml deep well microplate.  It is used with the MiniBeadbeater-96 cell disrupter.  One or two 50 ml screw cap centrifuge tubes are placed completely inside the cold block and the contents shaken in the "wall to wall" direction.  The block can be pre-cooled in a deep freezer or, at cryo-temperatures, with dry-ice or liquid nitrogen.

Included with each vial block are 25 sterile, polypropylene 50 ml screw cap tubes (Stockwell brand, part # 3252).*

*Important note:  To maximize the efficiency of heat transfer, this aluminum tube holder was designed to fit with close tolerance to the Stockwell-brand 50 ml tube.  Other brands of 50 ml centrifuge tube may not fit properly.  If you prefer to use a different brand tube, please check with us for compatibility.

Learn More »

Deep Well Micro-plates and Mats

Deep Well Micro-plates and Mats

Microplates and sealing mats from Porvair Sciences.

Cat. No. 219030
2 ml Deep well Microplate, 50 plates per case
Cat. No. 219004
Sealing Mats, (fits 219030), 50 mats per case

Learn More »

Polypropylene Microvials - 2 ml and 7 ml

Polypropylene Microvials - 2 ml and 7 ml

Cat. No. 10831, 2 ml Sterile vials and caps, 100 count. In insulating, foam rack
Cat. No. 10832, 2 ml Non-sterile vials and caps, 500 count
Cat. No. 522S, 2 ml Sterile vials and caps, 500 count
Cat. No. 3205, 7 ml Non-sterile vials and caps, 1000 count

Cat. No. 1119, 100-place insulating styrofoam microtube racks, pkg of 10

 

Learn More »

Screw Cap Centrifuge Tubes - 50 ml

Screw Cap Centrifuge Tubes - 50 ml

50ml polypropylene screw cap centrifuge tubes.  Sterile, with cap.  25 tubes per bag.

 

Learn More »

Sonibeast tube with Locking Lid - 0.6 ml

Sonibeast tube with Locking Lid - 0.6 ml

Cat. No. L-502-GRD-Q, 0.6 ml polypropylene tube with locking cap, 1000 count (for SoniBeast disrupter)

Learn More »

Stainless Steel Microvials - 2 ml

Stainless Steel Microvials - 2 ml

 

Cat. No. 2007, 1.8 ml capacity type 305 stainless steel microvials.   Polyethylene flange caps are included1.  Package size: 100 pieces

Learn More »

Vial Rack, Polycarbonate, for 7 ml screw-cap tubes

Vial Rack, Polycarbonate, for 7 ml screw-cap tubes

Polycarbonate vial rack with a microplate footprint.  Holds four to twelve 7 ml screw-cap vials (BioSpec's Cat No. 3205). Used for extraction and cell disruption of sample too large to be accommodated inside standard 2 ml microvials.   Compatible with our MiniBeadbeater-96.

Learn More »

Vial Rack, Polypropylene, for 1.5 & 2 ml Microvials

Vial Rack, Polypropylene, for 1.5 & 2 ml Microvials

A pack of five polypropylene microvial vial racks.  The rack has a standard microplate footprint and holds up to forty-five 1.5 ml or 2.0 ml microvials on one side and thirty-two 0.5 ml microvials on the other side.  One of these racks comes standard with our Mini-BeadBeater-96.

Learn More »

Vial Rack, Solid Alumimum, for 2 ml Microvials

Vial Rack, Solid Alumimum, for 2 ml Microvials

This solid aluminum vial rack for 2ml vials offers superior temperature control during beadbeating than bead mill cell disrupters relying on flowing air chilled by dry-ice or refrigeration. It is well-known that chilled air has much poorer heat conductivity than chilled metal. The block is pre-cooled in a deep freezer or, to cryo-temperatures with dry-ice or liquid nitrogen.  Having dimensions of a standard deep-well microplate, it is compatible with not only our MiniBeadbeater-96 but with several competitor microplate shakers.

Learn More »

XXTuff Reinforced Microvials - 2 ml

XXTuff Reinforced Microvials - 2 ml

Cat. No. 330TX, XXTuff™ non-sterile, reinforced 2 ml vials and caps, 500 count

Learn More »